An endearing look back on a time refreshed. When days lingered in air filled with life and the unexplored traveled upon, accompanied by sounds called out by that first bike ride … once upon a child's memory.
From the 1970s-‘80s era are these 2 solid built to last Miniature Tricycles, made of metal and wood. No two are the same and were created with a rustic (imperfect) art style of a yester year long past.
The largest of the pair is stout and true to a Metal Smith’s tolerance to realism. Turning points almost seem set with bearings, but unknown. It’s equipped with a load absorbing metal spring on its front steering wheel fork, allowing for a small light weight item, pet or plant? As most parts the wheels are of a heavier iron then commonly found on similar crafted bikes. Back of this tricycle also is set with 3 hooks on its axle support to the rear wheels, possibly for a wagon to be attached?
No wagon included and it’s assumed able to hold up to the weight of a small pet/plant, but untested and not advised, next owner’s discretion.
Included in sale is a 4 wheeled heavy gauge metal Carriage Frame. This possibly could be used in building an add-on to the larger tricycle**. It is made in China (decorative use only) and has spring loaded axles for isolating/ spacing of the moveable wheels to frame. The carriage design itself too acts as a shock, dampening an object if placed on top of it. This is only offered, and can be removed from purchase of the 2 Trikes in Sale by use of the ‘Contact Us’ in the Store’s front page, upper header. “Decline offer for #4119-2.” This is all that’s needed to remove it from shipping with the 2 tricycles. Please see “About Us,” ‘Shipping.’
Wheels will be separated from Carriage when shipped to reduce transporting costs.
Product Quantity: Only 1 set in stock. Set includes 1 large and 1 small Tricycle with 1 included offered Carriage Frame.
Condition: Very Good! Well cared for with no rust or deterioration viewed. Photos show limited areas where paint was not used on larger tricycle’s wheels. They were deliberately left bare and coated, allowing an appealing roughness of art form.
Size: approx. ->
Large - H: 15.75" x L: 18.0" x W: 12.0". Heavy gauge steel throughout, wheels are 0.25" - 5/16" thick square stock rolled.
<-> Small - H: 9.5" x L: 10.5" x W: 8.25", wheels are 1/16" thick
<-> Carriage - H: 7.5" x L: 12.25" x W: 9.0", wheels are 1/16" thick
Large -6 lbs 11.0 oz
<-> Small - 1 lb 7.0 oz
<-> Carriage - 2 lbs
| ~ Ship (12.1lbs)
… without Carriage | ~ Ship (10.1lbs)
- Ship weight for this sale is an approximation till revised at time of purchase. For which a total 'of all items' and their weights being shipped will be known, should this be required.
**Metal wheeled Carriage Frame suggestion, in setting ability for use with the Tricycle:
18" x 1/8" x 0.5" flat iron bar - Cut and Bend to form, drilled and bolted by 2 bolt & nut retainers into pre-set holes found on top of the carriage and then welded (or clamped) to the 'following iron rod’ set perpendicular to it.
3/16" x 6.0" iron rod, for setting into tricycle back hooks.
Plus what added ideas come to mind.
Items not included in sale
Please review 'About Us,' to be better informed before purchasing.